Mist Eliminators
 
About Us Products Quality Contact Us
 

PVC Mist Eliminators.
Aditya PVC mist eliminators are manufactured using virgin PVC only. These eliminators are maintenance free, technically superior, cost-effective and have long life. The eliminators are the best substitute for G>I mist eliminators. They are chemical effect and corrosion free. The eliminators are easily installable and hence, save time. Aditya mist eliminators are available in customized length.

Aditya mist eliminators are manufactured with smooth gloss surface to reduce pressure drop and it also helps save power.

The low drag co-efficient of the profile enables it to function at higher velocities with excessive pressure drop. At higher velocities, smaller droplets can be removed due to the increased inertia force acting on the entrained liquid.

Different types of eliminators are available to meet specific industrial requirements:

W Type Eliminators
.....................................................................
W – type.
Eliminators Width – 170 mm
Best recommended pitch – 29.5 mm
C-Type Eliminators
.....................................................................
C – type.
Eliminators Width – 170 mm
Best recommended pitch –25 mm
M-Type Eliminators
.....................................................................
M – type.
Eliminators Width – 128 mm
Best recommended pitch –30 mm
Z-Type Eliminators
.....................................................................
Z – type louvers
Louver width - 110 mm
Best recommended pitch 70 mm
HL-23 Type Louvers
.....................................................................
HL – 23 Louvers
Louvers width – 150 mm
Best recommended Pitch 80 mm
Notch Plate
.....................................................................
Notch Plate
for fixing eliminators.
 
Dumper Seal
.....................................................................
Dumper Seal
 
 
2008 Aditya Plastics. All Right Reserved. About Us | Products | Quality | Inquiry | Contact Us